Initial Commit

2024-06-12 23:21:05 +02:00
commit e00cc65941
22 changed files with 5772 additions and 0 deletions
--- a/oldblink/main.c
+++ b/oldblink/main.c
@@ -0,0 +1,123 @@
+/**
+  ******************************************************************************
+  * @file    GPIO_Toggle\main.c
+  * @author  MCD Application Team
+  * @version V2.0.4
+  * @date    26-April-2018
+  * @brief   This file contains the main function for GPIO Toggle example.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2014 STMicroelectronics</center></h2>
+  *
+  * Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
+  * You may not use this file except in compliance with the License.
+  * You may obtain a copy of the License at:
+  *
+  *        http://www.st.com/software_license_agreement_liberty_v2
+  *
+  * Unless required by applicable law or agreed to in writing, software 
+  * distributed under the License is distributed on an "AS IS" BASIS, 
+  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  * See the License for the specific language governing permissions and
+  * limitations under the License.
+  *
+  ******************************************************************************
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm8s.h"
+#include "stm8s_it.h"    /* SDCC patch: required by SDCC for interrupts */
+
+/**
+  * @addtogroup GPIO_Toggle
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Evalboard I/Os configuration */
+
+/* automatically use built-in LED for known nucleo boards */
+#if defined(STM8S_NUCLEO_208RB) || defined(STM8S_NUCLEO_207K8) 
+#define LED_GPIO_PORT  (GPIOC)
+#define LED_GPIO_PINS  (GPIO_PIN_5)
+#elif defined(STM8S103)
+/* for STM8S103F3 breakout board. building with GPIOG would result in failure (chip 
+ * does not have that GPIO peripheral) */
+#define LED_GPIO_PORT  (GPIOB)
+#define LED_GPIO_PINS  (GPIO_PIN_5)	
+#else 
+#define LED_GPIO_PORT  (GPIOG)
+#define LED_GPIO_PINS  (GPIO_PIN_3 | GPIO_PIN_2 | GPIO_PIN_1 | GPIO_PIN_0)
+#endif
+
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+void Delay (uint16_t nCount);
+
+/* Private functions ---------------------------------------------------------*/
+/* Public functions ----------------------------------------------------------*/
+
+/**
+  * @brief  Main program.
+  * @param  None
+  * @retval None
+  */
+void main(void)
+{
+
+  /* Initialize I/Os in Output Mode */
+  GPIO_Init(LED_GPIO_PORT, (GPIO_Pin_TypeDef)LED_GPIO_PINS, GPIO_MODE_OUT_PP_LOW_FAST);
+
+  while (1)
+  {
+    /* Toggles LEDs */
+    GPIO_WriteReverse(LED_GPIO_PORT, (GPIO_Pin_TypeDef)LED_GPIO_PINS);
+    Delay(0xFFFF);
+  }
+
+}
+
+/**
+  * @brief Delay
+  * @param nCount
+  * @retval None
+  */
+void Delay(uint16_t nCount)
+{
+  /* Decrement nCount value */
+  while (nCount != 0)
+  {
+    nCount--;
+  }
+}
+
+#ifdef USE_FULL_ASSERT
+
+/**
+  * @brief  Reports the name of the source file and the source line number
+  *   where the assert_param error has occurred.
+  * @param file: pointer to the source file name
+  * @param line: assert_param error line source number
+  * @retval None
+  */
+void assert_failed(uint8_t* file, uint32_t line)
+{ 
+  /* User can add his own implementation to report the file name and line number,
+     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
+
+  /* Infinite loop */
+  while (1)
+  {
+  }
+}
+#endif
+
+/**
+  * @}
+  */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/